Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 271
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Stake Offs. : This is the offset value that will be
used for setting the offset stake. If the
point is left of centerline, the value
entered must be a negative number.
S. Offset Ht : This display indicates the method used
in computing the elevation of the point
to be staked. The three methods are
"PREVIOUS ELEMENT",
"INTERPOLATED" and
"HORIZONTAL".
Offset : Horizontal offset to apply to current
chainage.
Hght Offset : Vertical offset to apply to current
chainage.
Activates the slope staking options
Move along the current cross section from right to left.
Sets the cross section point to the centerline
Move across the current cross section from left to right
Displays a plot of the template.
The first point we want to stake for the bike path is the
left edge of pavement. This point is 1.5 m left of
centerline so the "∆CL Offset" value should be set to
a -1.5 m.
Change the location to -1.5 m. The "∆CL Hght Diff"
value will automatically change to the correct vertical
difference based upon the design of the template.