Filter
Top Products
80 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
Station Data
Enter station point number and height of the instrument.
FREST\ STATION DATA
14:03
αNUM
F1
F2 F3
F4
F5 F6
HELP CONF
MC
Station no. : 1
Inst.Height : 1.555 m
Proceed to define the target points.
Start the "CONFIGURATION"
Alpha-numerical/numerical input.
Target Point
Enter the target point number and height of the
reflector.
FREST\ TARGET POINT
14:03
CALC LIST <-- --> αNUM
F1
F2 F3
F4
F5 F6
HELP
MC
Station no. : 1
Refl.Height: 1.555 m
Run the calculation. Note, the key will be
assigned after sufficient measurements were taken to
calculate a position.