Filter
Top Products
54 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
TD
∆∆
∆∆
∆ Easting : Difference in Easting between point 1
and point 2 (E
2
- E
1
).
The grid coordinates are only valid for
oriented instruments set up on a
known point.
∆∆
∆∆
∆ Northing : Difference Northing between point 1
and point 2 (N
2
- N
1
).
Note, the grid coordinates are only
relevant for oriented instruments set
up on a known point.
Return to the dialog "NEXT POINT" and measure the
next point.
Delete previous inputs. Proceed with the dialog "FIRST
POINT" to enter a new reference point. This function is
available for "RADIAL MODE" only.
Record the following results in the active file:
WI 11 Point number of point 2 or radial point
number
WI 25 Azimuth from point1 to point 2
WI 35 Horizontal distance
WI 37 Height difference between point 1 and
point 2
WI 39 Slope distance
WI 79 Point number of point 1 or center point
number
Toggle between Radial/Polygon Mode.