Filter
Top Products
274 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
STAKE\ POLAR STAKEOUT
14:03
MC
Target no. : 3
∆ Hz : 0°00'00"
∆ Dist : 0.007 m
∆ Height :FILL 1.320 m
Elevation : 32.700 m
ALL DIST REC TARGT αNUM
F1
F2 F3
F4
F5 F6
HELP METHD PLOT
The polar method of stakeout is the default for
"ROADPLUS".
Turn the instrument until "∆ Hz" is zero.
Line up the prism pole.
Measure the distance.
The "∆ Dist" value indicates how far away the
measured point is from the point chosen to be staked. A
positive value means to move away from the instrument
by the amount shown. If the value is negative, move
towards the instrument. The display will also show the
cut or fill value for the measured point. When both the
horizontal circle and distance read zero or close to it,
the measurement can be recorded.
Record the staked out position, returns to the "CROSS
SECTIONS" display and automatically moves to the
next point on the cross section.