Filter
Top Products
152 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
TR
• Enter Backsight Azimuth
This dialog corresponds to the TPS-System 1000 basic
dialog with the additional entry of the backsight
azimuth.
On completion of the first measurement, the program
continues either with "MULTIPLE MEAS" or with the
"TRAVERSE MENU" according to the settings in the
configuration.
TRAV\ NEW TRAVERSE
14:03
MC
ALL DIST REC TARGT
Measure Backsight Ponit
BS Azimuth : -----
Point no. : 500
Refl.Height : 1.300 m
Hz : 249°10'20"
V : 90°19'52"
Slope Dist. : ----- m
Height diff : ----- m
Easting : ----- m
Northing : ----- m
Elevation : ----- m
F1
F2 F3
F4
F5 F6
HELP I<>II
Simultaneously measure and record data on the active
recording device.
Measure a distance
1
and record data on the active
recording device.
Measure a distance without recording.
Enter target data as described in chapter "Measure &
Record" of "SYSTEM" - user manual.
Change the theodolite face.
Call up the CODE function.
1
Distance measurement is optional.
BS Azimuth : Enter the backsight azimuth for the
orientation.