Filter
Top Products
66 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
SO
Stakeout
Points must have known coordinates. Various methods
can be used, depending on the Stakeout Method set.
Motorized instruments can drive the telescope to the
horizontal and vertical direction of the point to be
staked. For more information refer to chapter "Select
Stakeout Method".
STAKE\ POLAR STAKEOUT
14:03
ALL DIST REC TARGT POSIT
F1
F2 F3
F4
F5 F6
HELP METHD PLOT
MC
Target no. : 0025
∆ Hz : 90°10'02"
∆ Dist : 4.567 m
∆ Height :FILL 0.102 m
Elevation : 32.543 m
Polar Stakeout
After the first distance has been measured, the
differences between calculated and measured direction
and between calculated and measured horizontal
distance are displayed. If the elevation of the point to be
staked is available, the height difference between the
last measured reflector and the point to be staked is
shown together with the measured elevation of the
reflector point.
PROG_Z08
E
E0
N0
H
N
∆H
Pt1
point to be staked
∆Hz
∆Dist
Values for ∆Hz and ∆D will be updated each time a new
distance is measured.