Filter
Top Products
206 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
The point coordinates can either:
• be determined by measurement,
• entered manually using a keyboard or
• read from the memory card.
Data, both measured and read from the file, can be
mixed. This means, however, that station coordinates
and orientation have to be correctly set.
Directions and distances can be entered manually,
called up or freshly determined. The values can then be
amended by means of multiplication, division, addition
and subtraction.
The program "Stakeout" can be called up directly from
the individual result dialog boxes (if available) in order
to set out the points immediately.
The program "Stakeout" assumes that the instrument is
set and oriented to a known point.