Filter
Top Products
294 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Vertical Alignment
Geometric elements supported:
Element Definition Declaration in the
Alignment file
Tangent Coordinate (Km,H) to Coordinate (Km,H) "STRAIGHT"
Circular curve beginning of curve(Km,H), Radius, "000CURVE"
end of curve (Km,H);
Parabola Coordinate (Km,H), Parabola parameter / "0PARABOL"
Parabola length;
End of project Coordinate (Km,H) "00000EOP"
Vertical Alignment File Header:
41....+000JOBID 42....+0VALIGNM 43......+STACOORD
WI 41 Job-Identification. Max. 8 ASCII-characters,
may be defined by user.
WI 42 Identification of Vertical Alignment file. May
not be changed by user.
WI 43 Identification of principal point type file. May
not be changed by user.
Example for a data block for a vertical alignment
point:
11....+KILOMETR 71....+0NEXTGEO 72....+0NEXTRAD 83..10+00000000
WI 11 Chainage of a vertical alignment point
WI71 Type of the following geometric element
WI72 Radius of the following geometric element or
parabola parameter
WI83 Elevation of the point