Filter
Top Products
288 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
SLOPE STAKING Menu Function Key Summary
Measures the distance to the target, and automatically
records the data as defined by the currently set
recording mask.
Measures the distance only, and updates the display.
Records the information for the current measurements.
Permits the user to change the height of the target.
Stores the data to the log file.
The store function is not available until a
measurement is initiated with the "DIST" key.
Switches between face one and face two for
measurements.
After a measurement is made to the prism pole the
"REFPT" option will be available. See section
"Reference Point" for a detailed discussion of this
option.
Moves along the alignment until "∆Chainage" =0, that
is, move onto the correct cross section defined for that
point. This allows checking against the actual cross
section defined at that point.
The "
∆∆
∆∆
∆St=0" function is not available until a
measurement is initiated with the "DIST" key.