Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 203
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
Recommendation:
If in general you prepare an empty template (only the
zero point), you can at any time choose this template
in order to manually enter points or to call up axis
points. Call this template something like AXIS or
EMPTY.
Check your data for errors (typing errors, signs etc.)
before you load it into the memory card.
The last character at the end of each data line must
always be a space (ASCII-character 32).
WI 11 and WI 41: The block number is located from
position 3 to 6.
Example: Cross section
41....+Example1 42....+TEMPLATE
110002+Tmpl0123 35..10-00013000 36..10-00003000
110003+Tmpl0123 35..10-00010000 36..10-00005000
110004+Tmpl0123 35..10-00004000 36..10-00000100
110005+Tmpl0123 35..10+00004000 36..10+00000100
110006+Tmpl0123 35..10+00010000 36..10-00006000
110007+Tmpl0123 35..10+00013000 36..10-00003500
110008+Tmpl0124 35..10-00012000 36..10-00002000
110009+Tmpl0124 35..10-00011000 36..10-00004000
110010+Tmpl0124 35..10-00004000 36..10+00000100
110011+Tmpl0124 35..10+00004000 36..10-00000100
110012+Tmpl0124 35..10+00011000 36..10-00005000
110013+Tmpl0124 35..10+00012000 36..10-00002500