Filter
Top Products
162 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
TR
Point no. : The target point number.
No. of Meas : Counter of the measurements.
σσ
σσ
σHz : Standard deviation of the horizontal
direction for a single measurement.
σσ
σσ
σV:Standard deviation of the vertical
angle for a single measurement.
σσ
σσ
σSlope Dist : Standard deviation of the slope
distance for a single measurement.
ØHz : Mean value of the HZ-measurements.
ØV : Mean value of the HZ-measurements.
ØSlope Dist : Mean value of the slope distances.
Further measurements.
Delete all measurements of the current point and start
again.
Record the mean value of the measurements on the
active recording device. Return to the "TRAVERSE
MENU" dialog.
Enter target data as described in chapter "Measure &
Record" of "SYSTEM" - user manual.
Accept the mean values and return to the "TRAVERSE
MENU".