Filter
Top Products
194 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
The data block
11....+0STATION 71....+GEOM_ELE 72....+RAD/PARA 73....+TEMPLATE
81..10+00000000 82..10+00000000
WI 11 STATION: Chainage at the start of the
element. 8-digit number.
WI 71 GEOM_ELE: Geometrical element
according to table page 190 (STRAIGHT,
000CURVE, 00SPIRIN, 0SPIROUT,
00000EOP).
WI 72 RAD/PARA: Arc radius or A-parameter for
the spirals. 8-digit number.
If WI 71 = STRAIGHT / 00000EOP, then WI
72 = 00000NON.
Sign:
+, for curves to the right (centre of circle to
the right of the alignment),
-, for curves to the left (centre of circle to the
left of the alignment).
WI 73 TEMPLATE: Name/number of the cross-
sectional profile for the geometrical element
defined in WI 71. 8 alphanumeric characters.
The following combinations are reserved and
are not to be used: 00000NON and
LASTTMPL.
WI 81 E-coordinate of the main point (starting
point, start of curve, end point according to
table page 190). 8-digit number.
WI 82 N-coordinate of the main point (starting
point, start of curve, end point according to
table page 190). 8-digit number.