Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 89
IV
EL
AH
OH
BS
SM
AS
FS
Posn Acc TP : Position accuracy of the target points.
The entered value, is used as an "a
priori" accuracy in the calculation.
The position is regarded as "error
free", if the computed standard
deviation is within twice the entered
value.
Two Faces : YES for dual-face measurement,
NO for single-face.
User Disp : YES; the measured value indication is
used from application "Measure and
record".
NO; the default indication is used for
the "Free Station".
Log File : ON, records measurements in a Log-
File.The format is described on page
90.
Log FlName : Enter the Log File Name
Display software-version
Set the values to default. Default values are shown in
the previous dialog.
Exit the program.
Store the current configuration and proceed to the
dialog "STATION DATA".