Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 67
IV
EL
AH
OH
BS
SM
SO
Target no. : Point number of the point to be
staked.
∆ ∆
∆ ∆
∆ Hz : Difference in Hz circle reading
between the actual horizontal
direction and the calculated direction.
∆ ∆
∆ ∆
∆ Dist : Difference in horizontal distance
between the measured and calculated
distance.
∆ ∆
∆ ∆
∆ Height : Difference in height between the
measured reflector point and the
stakeout point, expressed both
numerically and as CUT/FILL.
Elevation : Elevation of the measured target point.
Simultaneously measure and record data on the active
recording device.
Measure a distance.
Record the measurement on the active recording device.
Enter target data as described in chapter "Measure &
Record" of "System" - user manual.
Re-position the telescope on the target. Note, this
function is only available for motorized theodolites.
Change stakeout method. For more information refer to
chapter "Select Stakeout Method".
Generate a plot of the stakeout data. For more
information refer to chapter "Plot".
Exit the program.
Acquire the next point to stake.