Filter
Top Products
178 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
Program flow
Chainage and centre-line
offset
Hght. Shift : 0.000 m
ChaingeIncr : 100.000 m
F1
F2 F3
F4
F5 F6
HELP
ROADL\ CHAINAGE &OFFSET
14:03
MC
Chainage : 0.000 m
Element : POB
Offset : 0.000 m
HghtOffset : 0.000 m
CHECK CH--> <--CH XSEC
The dialog is used to enter the longitudinal and cross
section data for a point to be set out, or to call the
function "X-SECTION CHECK".
Chainage : The present chainage for
"STAKEOUT".
After setting-out is completed, the
chainage is automatically changed to
the next value divisible by
ChaingeIncr.
The chainage of the main points
(change of elements) is displayed
independently of ChaingeIncr. Any
desired chainage can be keyed in.
For the function "X-SECTION
CHECK" the values displayed and
data from the cross section do not
influence the calculation in the "X-
SECTION CHECK".