Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 269
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Element : This displays the element for the
chosen chainage such as POB, PC,
CURVE etc.
Offset : Horizontal offset to apply to the
current chainage.
Hght Offset : Vertical offset to apply to the current
chainage.
Switches to measuring mode to allow for a
measurement to determine the chainage and offset for
the point shot. After taking the measurement, press
and the program will return to the "CHAINAGE
& OFFSET" opening display. The chainage value of
where the shot was taken along with the horizontal and
vertical offset are displayed.
Changes to the next chainage.
Changes to the previous chainage.
Activates the cross section options.
The result of the road chainage and offset is stored. Just
active after taking a measurement.
Activates the "Station Equation" option. Active only if a
"Station Equation File" is selected during display
"SELECT ALN FILES" (page 254).
Allows insertion of a note into a log file. This may be
use for comments, errors, etc.
Calls the dialog "POINT COORDS" in order to display
the coordinates of the point to be set out. From there,
calls the program "STAKEOUT".