Filter
Top Products
338 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
DE
MO
Selecting the points to
be measured
Start selection of the points to be measured in the dialog
"POINT SELECTION" (page 336).
ALL DIST REC ZIEL ENDE αNUM
F1
F2 F3
F4
F5 F6
HELP NONE ALL POSIT
MONIT\ POINT SELECTION
14:03
--> DONE OUT
MC
Point no. : 1
Selected : IN
Hz : 126°13'42"
V : 89°44'11"
Slope Dist. : 29.7961 m
ñ
In this menu, you can select the points which you
require for the automatic measurement.
A selected point can be either activated or deactivated.
Several points with the same point number can be
present.
When you have selected all the points you require, press
(DONE) to quit the menu.
Display the next point in the file.
Quit the menu and goes to the main menu for the point
selection (page 336).
Alternates between switching a point "IN" and "OUT".
No point from the current file is to be selected.
All points from the current file are to be selected.
Position the instrument for the point selected.