Filter
Top Products
102 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
RL
Rec Diff : Set to NONE, no additional
measurement is recorded.
Set to O the program will record ∆
Offset values only.
Set to O/ L, the program will record
both ∆ Offset and ∆ Line values.
Set to O/L/H, the program will record
∆ Offset, D Line and ∆Height of target
values.
If the option "Height" is set to
"Inter" you can in addition calculate
the values:
Set to O/S the program will record
both ∆ Offset and ∆ Spatial distance
values.
Set to O/S/P, the program will record
∆ Offset, ∆ Spatial distance and
∆Perp.length of the perpendicular line.
(Refer to figure page 94)
User Disp : Set to YES, the display defined in the
MEAS application will be used.
If set to NO, the "REFERENCE
LINE" default display applies.
Height : Set to Ref, ∆ Height (1) will be
calculated from the first base point
and the reflector.
Set to Inter, the program will
calculate ∆ Height (2) from the
interpolated height of the base line at
∆ Line of the reflector position and
the reflector position itself.
If set to Inter, the Line / a option is
set to NO automatically.
Log File : Set to ON, the program will record
measurement data in a log file in the
format described on page 103.
Log FlName : Enter the Log File Name.