Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 51
IV
EL
AH
OH
BS
TD
Measure Mode
This dialog is used in accordance with the settings of
the system function "Measure & Record" or according
to the dialog shown below.
TIED\ FIRST POINT
14:03
ALL DIST REC TARGT IMPOR
Easting : ----- m
Northing : ----- m
Elevation : ----- m
MC
Point no. : 546
Refl.Height : 1.654 m
Hz : 230°45'23"
V : 4°52'35"
Slope Dist. : ----- m
Height diff : ----- m
F1
F2 F3
F4
F5 F6
HELP CONF I<>II
The input for the start point is only possible after the
program start or with the function in the dialog
"RADIAL MODE".
For all following points the program requests (NEXT
POINT).
The dialog for the following points is identical with
dialog above, except for the title.
Simultaneously measure and record in the active file.
Proceed with the dialog "NEXT POINT". If the second
point has already been measured, the program will
proceed to the "RESULT" dialog.
Measure a distance. Record the measurement in the
active file and proceed with the dialog "NEXT
POINT". If the second point has already been
measured, the program will proceed to the "RESULT"
dialog.
Measure the distance. Accept the measurement without
recording. If the second point has already been
measured, the program will proceed with the
"RESULT" dialog.