Filter
Top Products
242 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
Explanation of the polarity rule of L and Q
During entering, the polarity is based on the straight
line 1 -> 2.
+ Q Parallel displacement to the right
- Q Parallel displacement to the left
+ L Displacement from basis point 1 in the direction
of basis point 2
- L Displacement from basis point 1 in the opposite
direction to basis point 2
Call up the function in the menu "OFFSETS".
COGO\ BASELINE START PT.
14:03
INPUT MEAS SEARC αNUM
F1
F2 F3
F4
F5 F6
HELP
MC
Rec. device : Memory Card
Search in : FILE01.GSI
Point/Code : 58
Manual entering of the baseline start point (or the
baseline end point). The standard TPS 1000 input
dialog box appears.
Measuring the baseline start point (or the baseline end
point). This function is described in chapter "Measure
& Record" (Measurement dialogue) of the "System"-
user manual.
Search for the coordinates of baseline start point (or the
baseline end point) in the coordinate file. This function
is described in chapter "Setup" (Import function) of the
"System"-user manual.
Exit the program.
or