Leica 1000Z01 Model Vehicle User Manual


 
282 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Set offset value and select
point to stakeout
ROAD+\ CHAINAGE & OFFSET
14:03
MC
Chainage : 0.000
Element : POB
Offset : 0.000 m
Hght Offset : 0.000 m
CHECK CH--> <--CH XSEC EDIT
F1
F2 F3
F4
F5 F6
HELP
To select the template point to stake (back of curb, edge
of pavement etc.):
The "CROSS SECTIONS" options display appears.
ROAD+\ CROSS SECTIONS
14:03
MC
1R
Chainage : 25.000
Template : +000tutor
CL Offset : 1.500 m
CL Hgt Diff : -0.030 m
Stake Offs. : 0.600 m
CATCH <- CENTR ->
F1
F2 F3
F4
F5 F6
HELP
Set the "CL Offset" value. This value is the distance
from centerline of the point you want to stake.
Move the cursor to "Template" and pick the cross
section template to use. Following set the "Stake Offs."
(stake offset value). If the point is left of the centerline,
enter the offset value as a negative value.
Continues with display "POINT COORDS".
or