Filter
Top Products
IV
EL
AH
OH
RE
46 TPS-System 1000 Programs-2.3.1en © Leica
Posn Acc TP : Position accuracy of the target points.
The entered value, is used as an "a
priori" accuracy in the calculation.
The position is regarded as "error
free", if the computed standard
deviation is within twice the entered
value.
Two Faces : YES for dual-face measurement,
NO for single-face.
Ben.Anzeige : YES; the measured value indication is
used from application "Measure and
record".
NO; the default indication is used for
the "Resection".
Log File : Set to ON, the program will record
measurement data in a log file as
described on page 47.
Log FlName : Enter the Log File Name.
Displays date and version.
Set the value to the default as described in dialog on
page 45.
Exit the program.
Store the current configuration and proceed to the
dialog "STATION DATA".