Filter
Top Products
Contents
Contents-1
1 Installing the Agilent 8702D
Step 1. Inspect the Shipment 1-3
Step 2. Set up Static-Safe Workstation 1-4
Step 3. Option 1D5, Connect the Frequency Reference 1-6
Step 4. Check the Fuse and Voltage Selection 1-7
Step 5. Connect the Line-Power Cable 1-9
Step 6. Connect a Keyboard 1-10
Step 7. Turn on the Agilent 8702D 1-11
Step 8. Connect a Printer or Plotter 1-12
Step 9. If You Connect a Printer 1-13
Step 10. If You Connect a Plotter 1-14
Step 11. Set the Clock 1-15
Step 12. Check the Operation 1-16
Step 13. Check the Operation (Option 011) 1-21
Step 14. Copy the EEPROM Disk 1-26
2 Automated Verification
Step 1. Initialization 2-3
Step 2. Measurement Calibration 2-4
Step 3. Device Verification 2-6
In Case of Difficulty 2-9
3Manual Verification
Step 1. Initialization 3-2
Step 2. Measurement Calibration 3-4
Step 3. Device Verification 3-5
In Case of Difficulty 3-9
4 Performance Tests
1. Test Port Output Frequency Range and Accuracy 4-3
2. External Source Mode Frequency Range 4-5
3. Test Port Output Power Accuracy 4-6
4. Test Port Output Power Range and Linearity 4-8
5. Minimum R Channel Level 4-10
6. Test Port Input Noise Floor Level 4-15
7. Test Port Input Frequency Response 4-19
8. Test Port Crosstalk 4-29