Filter
Top Products
1-8
Installing the Agilent 8702D
Step 4. Check the Fuse and Voltage Selection
WARNING
For continued protection against fire hazard, replace line fuse only
with same type and ratings, (type T 3A/250V for 100/240V operation).
The use of other fuses or materials is prohibited.
5
Set the rear panel line-voltage selector to the position that corresponds to the
AC power source. Refer to Figure 1-4.
Figure 1-4. Line Voltage Selector
Table 1-2. Line Power Requirements
Power: 115 VAC: 50 WATTS MAX.
230 VAC: 50 WATTS MAX.
Voltage nominal: 115 VAC / 230 VAC
range 115 VAC: 90
−
132 V
range 230 VAC: 198
−
254 V
Frequency nominals: 50 Hz / 60 Hz
range: 47
−
63 Hz