Filter
Top Products
1-21
Installing the Agilent 8702D
Step 13. Check the Operation (Option 011)
Step 13. Check the Operation (Option 011)
An Agilent 85047A S-parameter test set must be used when making measure-
ments.
1
Turn off the
LINE
power switch. Then, turn back on the
LINE
power switch.
2
Locate the serial number and configuration options shown on the display.
Compare them to the shipment documents.
3
Press
PRESET
, and observe that the analyzer is operating properly as shown in
Figure 1-17.
Figure 1-17. Checking the Operation (Option 011)
4
Connect the equipment as shown in Figure 1-18.