Filter
Top Products
1-24
Installing the Agilent 8702D
Step 13. Check the Operation (Option 011)
10
Press
MEAS
and then
Trans: E/E S12 REV
to check the reverse transmission mode
for channel 2. The measurement trace should be similar to the trace shown in
Figure 1-21.
Figure 1-21. Reverse Transmission Display
11
Connect the equipment as shown in Figure 1-22 and press
PRESET
.
Figure 1-22. Transmission Load Match Connections
12
Look at the measurement trace displayed on the analyzer. It should be similar
to the trace displayed in Figure 1-23.