Filter
Top Products
1-11
Installing the Agilent 8702D
Step 7. Turn on the Agilent 8702D
Step 7. Turn on the Agilent 8702D
1
Press the front-panel
LINE
key. Refer to Figure 1-7.
The front-panel
LINE
switch disconnects the mains circuits from the mains sup-
ply after the EMC filters and before other parts of the instrument.
2
If the Agilent 8702D fails to turn on properly, consider the following
possibilities:
• Is the line fuse good?
• Does the line socket have power?
• Is it plugged into the proper ac power source?
If the instrument still fails, return it to Agilent Technologies for repair. Refer to
“Returning the Instrument for Service” on page 7-5.
Figure 1-7. Turning on the Instrument