Filter
Top Products
1-3
Installing the Agilent 8702D
Step 1. Inspect the Shipment
Step 1. Inspect the Shipment
1
Verify that all components ordered have arrived by comparing the shipping
forms to the original purchase order. Inspect all shipping containers.
If your shipment is damaged or incomplete, save the packing materials and no-
tify both the shipping carrier and the nearest Agilent Technologies service of-
fice. Agilent Technologies will arrange for repair or replacement of damaged or
incomplete shipments without waiting for a settlement from the transportation
company. Notify the Agilent Technologies customer engineer of any problems.
WARNING
The Agilent 8702D weighs approximately 75 pounds (34 kilograms).
Use correct lifting techniques.
2
Make sure that the serial number and options listed on the instrument’s rear-
panel label match the serial number and options listed on the shipping
document.
Figure 1-1. Serial Number Label
The PORT 1 connector moves.
This is
not
a defect. This connector is designed to move so that test sets and other
accessories can be more easily connected to the instrument.