Filter
Top Products
1-9
Installing the Agilent 8702D
Step 5. Connect the Line-Power Cable
Step 5. Connect the Line-Power Cable
CAUTION
Always use the three-prong AC power cord supplied with this instrument.
Failure to ensure adequate earth grounding by not using this cord may cause
instrument damage.
CAUTION
Do
not
connect ac power until you have verified the line voltage is correct as
described in the following paragraphs. Damage to the equipment could result.
1
Connect the line-power cord to the instrument’s rear-panel connector. Refer to
Figure 1-5.
2
Connect the other end of the line-power cord to the power receptacle. Refer to
Figure 1-5.
Various power cables are available to connect the Agilent 8702D to ac power
outlets unique to specific geographic areas. The cable appropriate for the area
to which the Agilent 8702D is originally shipped is included with the unit. You
can order additional ac power cables for use in different geographic areas.
Refer to the
Agilent 8702D Reference
manual for a list of available power
cables.
Figure 1-5. Power Cord Connection