Filter
Top Products
1-16
Installing the Agilent 8702D
Step 12. Check the Operation
Step 12. Check the Operation
If your instrument is an Agilent 8702D Option 011, skip this step and continue
with “Step 13. Check the Operation (Option 011)” on page 1-21.
1
Turn off the
LINE
power switch. Then, turn back on the
LINE
power switch.
2
Locate the serial number and configuration options shown on the display.
Compare them to the shipment documents.
3
Press
PRESET
, and observe items shown in Figure 1-9.
Figure 1-9. Checking the Operation
4
Connect the equipment as shown in Figure 1-10.