Filter
Top Products
1-17
Installing the Agilent 8702D
Step 12. Check the Operation
Figure 1-10. Operation Check Connections
5
Press
PRESET
,
SYSTEM
,
SERVICE
MENU
,
TESTS
,
EXTERNAL
TESTS
,
EXECUTE
TEST
.
6
Follow the prompts shown on the display, and then press
CONTINUE
.
7
Press the up-arrow key,
EXECUTE
TEST
, and then follow the prompts shown on
the display. Then press
CONTINUE
.
8
Connect the equipment as shown in Figure 1-11 and press
PRESET
.
The test port return cable should have low-loss characteristics to avoid a deg-
radation in frequency response at higher frequencies.