Filter
Top Products
1-18
Installing the Agilent 8702D
Step 12. Check the Operation
Figure 1-11. Transmission Mode Connections
9
Press
CHAN2
to check the forward transmission mode for channel 2. Look at the
measurement trace displayed on the Agilent 8702D. It should be similar to the
trace shown in Figure 1-12.
The Agilent 8702D display shown in Figure 1-12 and Figure 1-13 are
Agilent 8702D Option 006 displays (30 kHz to 6 GHz span).
Figure 1-12. Forward Transmission Display
10
Press
MEAS
and then
Trans
:
E/E S12 REV
to check the reverse transmission mode
for channel 2. The measurement trace should be similar to the trace shown in