Filter
Top Products
5. Base Specifications Parameters
52
# Items Details
Setting range (unit)
1234 set06
Not used.
1235 set07 Not used.
1236 set08
(bit0)
Manual
rotation axis
feedrate unit
Select the unit of manual rotation axis feedrate.
0: Fixed to [°/min]
1: Same speed as before
0/1
1237
(PR)
set09
(bit0)
External
workpiece
offset
Set up this function to use the external workpiece
coordinates by shifting them to the Z axis.
0: Does not reverse the sign of external workpiece
offsets (Z shift) (same as before).
1: Reverses the sign of external workpiece offsets (Z
shift).
(Note) When the sign of external workpiece offsets (Z
shift) has been reversed, do not measure those
external workpiece offsets. However, the
external workpiece offsets can be measured by
tool pre-setter.
0/1
1238
(PR)
set10 Not used.
1239
(PR)
set11
(bit0)
Coil
switching
method
0: Via PLC. (YD3F)
1: NC internal processing. (YD3F is invalid.)
(Note) As for C6/C64/C64T, always set “1” when
using MDS-B-SP and later. However, if the
system structure needs the mechanical gears
for spindles, set “0”.
0/1
1240
(PR)
set12
(bit0)
Handle input
pulse
Select the handle input pulse.
0: MELDAS standard handle pulse
1: Handle 400 pulse
0/1
set12
(bit1)
Megatorque
motor handle
feed magnifi-
cation
Select the magnification of megatorque motor handle 1
pulse.
0: Double the handle 1 pulse magnification
specified by the handle feed magnification signal
(Y780, Y781, Y782).
1: Use the handle 1 pulse magnification specified by
the handle feed magnification signal (Y780,
Y781, Y782) as is.
0/1