Filter
Top Products
5. Base Specifications Parameters
18
# Items Details
Setting range (unit)
1037 cmdtyp Command
type
Specify the program G code series and compensation
type.
cmdtyp G code series Compensation type
1 System 1 (for M) Type A (one compensation
amount for one compen-
sation number)
2 System 2 (for M) Type B (shape and wear
amounts for one compen-
sation number)
3
System 2 (for L) Type C (two kinds of
compensation amount of
shape and wear per
compensation No.)
4
System 3 (for L) Same as above
5
System 4
(for special L)
Same as above
6
System 5
(for special L)
Same as above
7
System 6
(for special L)
Same as above
8
System 7
(for special L)
Same as above
There are some items in the specifications that can be
used or cannot be used according to the value set in
this parameter.
The file structure may also change depending on the
compensation data type.
Thus‚ after changing this parameter‚ initialize the
system with "#1060 SETUP".
# (1060) DATA ( 1) ( )
INPUT
↓
"BASE PARA SET? (Y/N)" : N
INPUT
↓
"FORMAT? (Y/N)" : Y
INPUT
↓
"SETUP COMPLETE"
(Note) The machining program is cleared with the
above operations. Back up necessary
machining programs in an external memory
before initializing.
1 to 8
1038 plcsel Ladder
selection
Specify the PLC type. 0 to 2