Filter
Top Products
5. Base Specifications Parameters
30
# Items Details
Setting range (unit)
1121 edlk_c Edit lock C Specify whether to prohibit editing of program Nos.
9000 to 9999.
0: Editing
possible
1: Editing
prohibited
1122
(PR)
pglk_c Program
display lock
The display and search of program Nos. 9000 to 9999
can be prohibited. Specify whether to prohibit display
and search.
0: Display and search is possible
1: Program details are not displayed
2: Program details are not displayed‚ and operation
search is prohibited.
The program details will not be displayed‚ but the
program No. and sequence No. will display in the
prohibited state.
0 to 2
1123 origin Origin zero
inhibition
Select whether to use the origin zero function. 0: Use
1: Do not use
1124 ofsfix Fix tool wear
compen-
sation
number
Specify whether to automatically increment the offset
No. by 1 with the input or to display the No. as it is in
the setting on the tool offset screen.
0: Increment the # No. by 1 when the input key is
pressed. (Same as general parameters)
1: # No. does not change even if input key is
pressed.
When making settings in sequence‚ 0 is handier.
When changing and setting repeatedly while adjusting
one offset value‚ 1 is handier
0/1
1125 real_f Actual
feedrate
display
Specify the feedrate display on the monitor screen. 0: Command
speed
1: Real move-
ment feedrate
1126
PB_G90
Not used. 0
1127
DPRINT
DPRINT
alignment
Specify the alignment for printing out with the DPRINT
function.
0: No alignment‚ data is printed with left
justification.
1: Align the minimum digit and output.
0/1