Filter
Top Products
5. Base Specifications Parameters
16
# Items Details
Setting range (unit)
1017
(PR)
rot Rotational
axis
Specify whether the axis is a rotary axis or linear axis.
For the rotary axis‚ the position display will be 360
degrees‚ and the axis will return to 0 degrees.
If the position display is to be continuously displayed
even with the rotary axis‚ set the axis as a linear axis
0: Linear axis
1: Rotary axis
1018
(PR)
ccw Motor CCW Specify the direction of the motor rotation to the
command direction.
0: Rotates clockwise (looking from motor shaft) with
the forward rotation command.
1: Rotates counterclockwise (looking from motor
shaft) with the forward rotation command.
0: Rotates
clockwise
1: Rotates
counter-
clockwise
1019
(PR)
dia Diameter
specification
axis
Specify whether the program movement amount is to
be commanded with the diameter dimension or as
movement amount.
When the movement amount is commanded with the
diameter dimensions‚ 5mm will be moved when the
command is a movement distance of 10mm.
The movement amount per pulse will also be halved
during manual pulse feed.
Among parameters concerning length‚ the tool length‚
the wear compensation amount and the workpiece
coordinate offset are displayed in diameter value when
diameter is specified‚ but other parameters are always
displayed in radius value.
0: Command with
movement
amount
1: Command with
diameter
dimension
1020
(PR)
sp_ax Spindle
Interpolation
Specify 1 when the NC control axis is used as the
spindle.
0: The NC control
axis is used as
the servo axis.
1: The NC control
axis is used as
the spindle.