Filter
Top Products
5. Base Specifications Parameters
26
# Items Details
Setting range (unit)
1095 T0tfof TF output Select how to handle TF for T00 command.
0: TF is output.
1: TF is not output
0/1
1096 T_Ltyp
(For L
system
only)
Tool life
management
type
Specify the tool life management type. 1: Life manage-
ment type l
2: Life manage-
ment type ll
1097 T1digt Tool wear
compen-
sation
number
1-digit
command
Specify the No. of digits in the tool wear compensation
No. in the T command.
0: The 2 high-order digits are the tool No.‚ and the 2
low-order digits are the wear compensation No.
1: The 3 high-order digits are the tool No.‚ and the 1
low-order digit is the wear compensation No.
This parameter will be fixed to 0 when tool life manage-
ment II is selected.
0/1
1098 Tlno. Tool length
offset
number
Specify the No. of digits in the tool length offset No. in
the T command.
0: The 2 or 3 high-order digits are the tool No.
The 2 or 1 low-order digits are the tool length
offset and wear compensation Nos.
1: The 2 or 3 high-order digits are the tool No. and
tool length offset Nos.
The 2 or 1 low-order digits are the wear
compensation No.
0/1
1099 Treset Cancel tool
wear
compen-
sation
amount
Specify how to handle tool compensation vector when
resetting system.
0: Clears the tool length and wear compensation
vectors when resetting.
1: Saves the tool length and wear compensation
vectors when resetting.
When the values are cleared‚ the compensation will
not be applied‚ so the axis will move the compensation
amount in the next compensation operation.
When the values are saved‚ the compensation will be
applied‚ so the axis will shift the differential amount of
the compensation amount in the next compensation
operation.
0: Clears
1: Saves