Filter
Top Products
Software Installation
10.
Type 4 for Exit (Update disk configuration and
exit)
and press (Enter).
The system displays the following message:
Hard disk partitioning complete.
A surface analysis will now be done.
This will destroy all data on the hard disk.
11.
Strike ENTER to continue or
Press (Enter).
The surface analysis takes 10 to 60 minutes
DEL to abort.
to complete
depending on the size of the disk. The results of the analysis
display while the analysis is running.
Checking for bad sectors in the UNIX System
partition. . .
Checking cylinder: xxx
The system also displays the default Filesystem assignments. The
default Filesystem assignments will vary from system to system.
At the end of the analysis, the following displays:
The UNIX System partition has xxxx cylinders
assigned to it.
1 cylinder will be used for alternate
This leaves xxxx cylinders (
XXXXXXXXX
available.
sectors.
bytes )
The following seems like a reasonable
partitioning of your UNIX system disk space.
A root filesystem of xxx cylinders (
XXXXXXX
bytes), a user (/usr) Filesystem of xxx
cylinders (
XXXXXXX
bytes), an extra user
Filesystem (/usr2) of xxx cylinders (
XXXXXXX
bytes), and a swap/paging area of xxx
cylinders (
XXXXXXX
bytes).
Is this allocation acceptable to you (y/n)?
3-8