Filter
Top Products
Hardware Installation
5.
Install each memory board in a 32-bit slot (3 connectors). Use the
leftmost available slots on the 6386 WGS and the rearmost
available slots on the 6386E WGS. The order in which the boards
are inserted does not matter. Follow the general instructions for
installing circuit boards given in the section General Installation
Instructions in this chapter.
6.
After modifying the memory configuration, you must run the
SETUP program. For details on how to run the SETUP program,
refer to the section Configuration: the SETUP Utility in this chapter.
If you have installed 8 MB of memory on your system, the
Extended Memory Size should be modified to 7168 kB.
Installing Additional Memory
in the 6386/SX, 6386/25, and 6386E/33 WGS
The 6386/SX, 6386/25 and 6386E/33 WGS processors can have up to 8
MB of memory installed on the motherboard.
NOTE:
There are two different versions of the 6386/25 motherboard.
See Figures 2-17 and 2-18 to determine which version of the
motherboard you have.
2-24