Filter
Top Products
Software Installation
Installing AUDIX Voice Power Application Software
The number of disks in the application software set depends on the disk
size being used.
Prior to AUDIX Voice Power application software installation, the
audix
login should have been created for the AUDIX Voice Power System
Manager. If this has not been done, follow the steps in the preceding
section, Creating a Login for Voice Administration before proceeding.
To install the AUDIX Voice Power application software, follow these steps:
NOTE:
The
Speech
section of the application software must be installed
before the
Software
section.
1.
Log in as
root
(if not already logged in).
2.
At the # prompt, type
installpkg
and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation medium
you intend to use.
Strike C to install
from CARTRIDGE TAPE or F to install
from FLOPPY DISKETTE. Strike ESC to
stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives.
Strike ENTER to install from drive O or
1 to install from drive 1.
— Type 1 and press (Enter) to select drive 1, or just press
(Enter) to Select drive 0.
3-29