Filter
Top Products
Upgrade Procedures
7. To install the Integrated Voice Power system software, follow these
steps:
a.
Log in as
root
(if not already logged in).
b.
At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation
medium you intend to use. Strike C
to install from CARTRIDGE TAPE or
F
to install from FLOPPY disk.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives.
Strike ENTER to install from drive
0 or 1 to install from drive 1.
__
Type 1 and press (Enter) to select drive 1, or just
press (Enter) to select drive 0.
NOTE:
If the system configuration includes a tape
drive or multiple floppy disk drives, additional
prompts may appear. Use the preceding steps
as a guide to responding to the system
prompts. The actual prompts may vary
depending on the system configuration.
c.
Insert disk 1 of the Integrated Voice Power system software
into the disk drive and press (Enter).
5-17