Filter
Top Products
Software Installation
29. Type the password a second time and press (Enter).
— The system displays
The system will be rebuilt.
30. When prompted, reset the system by pressing (Ctrl) + (Alt) + (Del)
simultaneously.
31.
When you receive a login prompt, log in as root using the
password you entered previously.
32. At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation medium
you intend to use.
Strike C to install from CARTRIDGE TAPE
or
F
to install from FLOPPY DISKETTE.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
The system displays
This system has two floppy drives.
Strike ENTER to install from drive O or
1 to install from drive 1.
Type
1
and press (Enter) to select drive 1, or just press
(Enter) to select drive 0.
NOTE:
If the system configuration includes a tape drive or multiple
floppy disk drives, additional prompts may appear. Use the
preceding steps as a guide to responding to the system
prompts. The actual prompts may vary depending on the
system configuration.
3-15