Filter
Top Products
Upgrade Procedures
■ Parallel Ports
The system displays
For the parallel port (interrupt
level 7), would you like to:
l) ENABLE the parallel port.
2) DISABLE the parallel port.
Please enter your selection
[1 or 2]:
Press 1 and (Enter) to enable the parallel port.
The system confirms your choice.
■ Interrupts
The system displays
Select the interrupt number of T/R
boards.
Press <Enter> for default value
[2] or [2, 3, 5,or 15] or q to
quit.
Press (Enter) to select the default value 2. You
receive the following message:
Interrupt number<number selected>
will be used for TR boards.
Press <Enter> to confirm or any
other key to reject.
Press (Enter) again. The system displays the
following message:
Moving files for IVPSS Software!
It will take a few minutes!
5-19