Filter
Top Products
Software Installation
7.
Type
1
for a
UNIX partition
and press (Enter).
The following message appears:
The UNIX System partition must use at least
xx% of the hard disk. Indicate the
percentage (xx-100) of the hard disk you
want this partition to use (or enter "c" to
specify in cylinders):
Type
100
and press (Enter).
8.
The
------------------------—.
following message displays:
Do you want this to become the Active
partition? If so,
it will be activated each
time you reset your computer or when you
turn it on again. Please type "y" or "n".
9.
Type
Y
and press (Enter).
The partition menu displays
Total hard disk
again:
size is xxxx cylinders
Partition
=========
1
SELECT ONE
Cylinders
Status
Type Start
End Length %
====== ======
===== ===
====== ===
Active
UNIX sys 0
<end> <max>
100
OF THE FOLLOWING:
1. Create a partition
2. Change Active (Boot from) partition
3. Delete a partition
4. Exit (Update disk configuration and
5. Cancel (Exit without updating disk
configuration)
Enter Selection:
exit )
Partition 1 is now the active partition.
3-7