Filter
Top Products
Software
Installation
7. Enter a valid port number.
NOTE:
The default port number is 01.
If no add-on multiports board has been installed, port 01
is the only valid port number. If you have installed the
multiport board, there are additional valid port numbers.
There are two (2) additional parallel ports per multiport
board.
If you want to configure a port other than port 01, press
[F2] (CHOICES). If a multiport board has been installed,
the Parallel Port Number menu appears.
8.
If a device has been configured for this port, enter the name of the
device configured for the port. If no device has been configured,
None
appears.
9. To setup a different or new printer, other than the one that appears
in the
Printer Type
field, use the following procedure.
— Press [F2] (CHOICES).
A list of available printers displays.
— Use the arrow keys to scroll through the list to highlight
the name of the printer model you are connecting and
press (Enter).
10. Enter the name you wish to use for the printer.
11.
Enter whether or not the printer output needs to be filtered to
display appropriately for your printer type. Select
yes if
the printer
output needs to be filtered or
No.
Press [F2] (CHOICES) and
toggle until your choice appears in the field and press (Enter).
In most cases the answer to this prompt is
Yes.
The only cases
where you may need to answer
No
is where the application itself is
doing its own filtering.
3-42