AT&T 2.1.1 Riding Toy User Manual


 
Software Installation
3
This chapter explains how to install all software necessary for the
operation of AUDIX Voice Power. AUDIX Voice Power can be installed
on either a dedicated computer, or on a computer that is also used for
controlling the telephone switch (Integrated Solution II environment).
The installation procedures are different. Please see the Switch Notes
for your telephone system to determine which procedure to use.
NOTE:
Procedures in this section that reference the UNIX
command installpkg are written for a machine with one
floppy disk drive. Additional steps, as indicated by the
system, may be required for machines with additional drives.
For upgrade procedures, see Chapter 5, Upgrade
Procedures.
See Appendix A for information about installing a second
hard disk.
3-1