Filter
Top Products
Configuration Testing and Troubleshooting
IVP4 Board Diagnostics
Diagnostics for the IVP4 boards can be run after the initial setup to
determine whether everything is connected properly and there is a dial
tone. The procedures for running IVP4 board diagnostics are sightly
different when AUDIX Voice Power runs on a dedicated computer and
when it runs on a computer that is also used for controlling the switch
(IS II environment).
To run
steps:
1.
2.
3.
4.
5.
6.
the IVP4 board diagnostics on a dedicated computer, follow these
Log into the system as
audix.
At the
User Login
menu, move the cursor to
Voice System
Administration
and press (Enter).
The Voice System Administration menu is displayed.
Move the cursor to
Configuration Management
and press
(Enter)
The Configuration Management menu is displayed.
Move the cursor to
System Control
and press (Enter).
The System Control menu is displayed.
Move the cursor to
Diagnose Equipment
and press (Enter).
The Diagnose Equipment screen is displayed.
Fill in the fields as follows:
— Equipment: card
— Equipment Number:
all
— Diagnose Immediately? yes
4-7