Filter
Top Products
Upgrade Procedures
Upgrading from Release 2.0 to
Release 2.1.1
The procedure for upgrading AUDIX Voice Power Release 2.0 to
Release 2.1.1 is outlined below. The exact procedure for each step is
included in the step or described elsewhere, either in this chapter or in
other parts of this document.
Since you are upgrading to AUDIX Voice Power 2.1.1, you have to add
additional memory to bring the total system memory capacity to 8 MB. To
install additional memory, follow the instructions for the appropriate 6386
system in installing Additional Memory in Chapter 2, Hardware
Installation.
CAUTION:
Files that have been backed up using Release 2.0 cannot be
restored once the system has been upgraded to Release 2.1.1.
To restore files backed up using Release 2.0 to an upgraded
AUDIX Voice Power 2.1.1 system, you must first remove the
AUDIX Voice Power 2.1.1 application software. Then you restore
the files and reinstall AUDIX Voice Power 2.1.1 application
software. This automatically upgrades the files to AUDIX Voice
Power 2.1.1 format.
1.
Using FORM A from the AT&T AUDIX™ Voice Power Planning
Guide and Forms (Release 2.1. 1), record the current Service Type
and Extension for each channel. To determine the current Service
Type and Extension, you must display the Voice Equipment
window, as described in the chapter Assigning Services to
Channels in your Switch Notes document. For each channel, write
down the Service Type (the Service field on the Voice Equipment
window). After the upgrade is complete, you reassign Service
Types and Extensions to all channels.
5-11