Filter
Top Products
Upgrade Procedures
4.
5.
6.
At the # prompt, type installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation medium
you intend to use.
Strike C to install from CARTRIDGE
or F to install from FLOPPY disk.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives.
Strike ENTER to install from drive
1 to install from drive 1.
TAPE
0 or
— Type 1 and press (Enter) to select drive 1, or just press
(Enter) to select drive 0.
NOTE:
If the system configuration includes a tape drive or multiple
floppy disk drives, additional prompts may appear. Use the
following steps as a guide to responding to the system
prompts. The actual prompts may vary depending on the
system configuration.
If the program installation requires more than one floppy disk, the
system cautions you to be sure to insert the disks in the proper
order.
Insert the first floppy disk and press (Enter).
For each additional floppy disk, insert the disk and press (Enter)
when prompted by the system.
5-3