Filter
Top Products
Upgrade Procedures
13.
Install AUDIX Voice Power, Release 2.0. This automatically
upgrades the AUDIX Voice Power Release 1.1 database to a
Release 2.0 compatible database.
To install the AUDIX Voice Power Application software, follow these
steps:
a.
Log in as
root (if not already logged in).
b. At the # prompt, type
installpkg and press (Enter).
For systems with an installed tape drive:
— The system displays
Please indicate the installation
medium you intend to use. Strike C
to install from CARTRIDGE TAPE or
F to install from FLOPPY disk.
Strike ESC to stop.
— Type f.
For systems with more than one floppy disk drive:
— The system displays
This system has two floppy drives.
Strike ENTER to install from drive
0 or 1 to install from drive 1.
— Type 1 and press(Enter) to select drive 1, or just
press (Enter) to select drive 0.
NOTE:
If the system configuration includes a tape drive or multiple
floppy disk drives, additional prompts may appear. Use the
preceding steps as a guide to responding to the system
prompts. The actual prompts may vary depending on the
system configuration.
c.
Insert disk 1 of the AUDIX Voice Power Application software
2.0 into the floppy disk drive and press (Enter).
5-8